FujiFilm SonoSite NanoMaxx, Дополнение к руководству пользователя

Страница: 2 / 30

2
Power-only adapter
Items needed for connecting the power-only adapter are included in the power-adapter kit: Allen wrench,
clamp, and screw.
To connect the power-only adapter
1
Insert the power-only adapter into its connector. See Figure 1 .
The cord hangs downward.
2
Place the clamp around the adapter with the hole outward and flat side toward the system.
3
Using the Allen wrench, secure the clamp to the system with the enclosed screw.
Note: If mounting the system on a stand, secure the clamp per instructions included with the transducer holder.
Figure 2 System with power-only adapter connected
Using AC power and charging the battery
To operate the system using AC power
1
Connect the dock or power-only adapter to the system.
2
Connect the DC power cable from the power supply to its port on the dock or to the power-only adapter.
3
Connect the AC power cord to the power supply and to a hospital-grade electrical outlet.
Specifications
Accessories
• Power-only adapter
Environmental limits
Power-only adapter
Operating:
10 to 40°C; 15 to 95% R.H.; 700 hPa to 1060 hPa
Shipping/Storage:
-35 to 65°C; 15 to 95% RH; 500 to 1060 hPa
Clamp