FujiFilm FW-330-1C N EC, Руководство оператора

Страница: 6 / 64

Impact Wrench
6
© Fuji- 9502001210
Intended Use
This product is designed for installing and removing threaded
fasteners in wood, metal or plastic.
No other use permitted.
Safety
WARNING Risk of Property Damage or Severe Injury
Ensure that you read, understand and follow all instructions
before operating the tool. Failure to follow all the
instructions may result in property damage and/or severe bodily
injury.
► Read all delivered together with the different parts of the
system.
► Read all Product Instructions for installation, operationand
maintenance of the different parts of the system.
► Read all locally legislated safety regulations regarding the
system and parts thereof.
► Save all and instructions for future reference.
Operation
See figures on page 1, 2 & 3.
• Fix the accessories properly to the tool.
• Connect device to a clean and dry air supply.
• Before each use , check if the socket is correctly held by
• the retaining ring. If not, the retaining ring must be re
placed.
•
To start the tool, use the trigger (A). Machine speed is in
crease by increasing pressure on the trigger. Release the
trigger to stop.
• To switch rotation, use the switch (B).
• To adjust output power in forward, use the regulator (C).
Lubrication
Use an air line lubricator with SAE #10 oil, adjusted to two (2)
drops per minute.
Clutch lubrication
Check clutch oil once each month. Use 2.5oz.(75ml) of
SAE#5W-30 oil or equivalent.
Maintenance instructions
• Follow local country environmental regulations for safe
handling and disposal of all components.
• Maintenance and repair work must be carried out by
qualified personnel using only original spare parts. Contact
the manufacturer or your nearest authorised dealer for
advice on technical service or if you require spare parts.
• Always ensure that the machine is disconnected from
energy source to avoid accidental operation.
• Disassemble and inspect the tool every three 3 months if
the tool is used every day. Replace damaged or worn parts.
• To keep downtime to a minimum, the following service kit
is recommended : Tune-up kit
Disposal
• The disposal of this equipment must follow the legislation
of the respective country.
• All damaged, badly worn or improperly functioning devic
es MUST BE TAKEN OUT OF OPERATION .
Useful information
Website
Log in to Fuji Industrial Technique: www.fujitools.com
You can find information concerning our products, accessories,
spare parts and published matters on our website.
Country of origin
Japan
Copyright
© Copyright 2021, Fuji Industrial Technique Co., Ltd., 2-1-14,
Kamiji, Higashinari Ku, Osaka, Japan, 537-0003
All rights reserved. Any unauthorized use or copying of the
contents or part thereof is prohibited. This applies in particular
to trademarks, model denominations, part numbers and
drawings. Use only authorized parts. Any damage or malfunction
caused by the use of unauthorised parts is not covered
by Warranty or Product Liability.