Design and specifications are subject to change without notice.
※ See the detailed user manual for more information.
The detailed user manual can be downloaded from our website.
URL ： https://fm.fujifilm.jp/form/pub/cctvlens/download-e
Before using this product, please read this operation manual carefully, and keep the manual handy for future use.
(1) Optical and Mechanical
Application
1
/
1.8
” Format Day/Night Camera
Focal Length
12.2
mm ～
39
0 mm
Zoom Ratio
32 倍
Iris Range
F3.1 ～ F16
Wide
30.52° × 23.30°
Angle of view （H × V）
Tele
1.0
0
°
× 0.
44
°
Aspect ratio 4 : 3
Focus Range
∞～ 3 m (from front of lens)
Built-in filter
Visible Light Cut Filter *1
Mount
C-Mount
Filter screw size
M 82 × 0.75 mm
Operating temperature
-10℃～ +50℃
Storage temperature
-20℃～ +60℃
Dimensions （H × V × D)
114 mm × 108 mm × 258 mm
Weight
2.
8
kg Approx
*1 Combining the visible light cut filter with a near-infrared camera is effective for removing dense fog..
(2) Electrical
Input voltage
DC 12V
Current
consumption
Maximum
Approx.360mA
Typical
Approx.70mA
Connector
Protocol
Pelco-D
Analog Control
Connector
16-pin Flat Cable Connector
Control Voltage
Zoom
DC 6/9/12V ， ± 6/ ± 9/ ± 12V
Focus
DC 6/9/12V ， ± 6/ ± 9/ ± 12V
Optical Filter
DC 5 ～ 12V
Potentiometer
5 ± 0.5V ， 3.3 ± 0.3V
Iris Control
Connector
4-pin Iris Cable (JEITA-compliant)
Control Mode
DC Iris Control
Video Iris Control
Manual Remote Control
Press the threaded portion of the camera mount against the threaded portion of the lens mount, and slowly rotate
the camera clockwise to screw it securely into the lens.
(1) Control mode selection switch settings
Switch lens control between serial mode and analog
mode.
(2) Iris mode selection switch settings
Set iris control to DC iris mode or video iris mode.
(3) Standard power supply selection switch settings
Select the external or internal power supply for the
potentiometer.
※ Always use the internal power supply for serial
control.
(4) Serial control mode selection switch
settings
(5) Analog control mode selection
switch settings
① GENERAL DESCRIPTION
② SPECIFICATION
④ ATTACHMENT TO THE CAMERA
⑤ CONTROL SWITCH SETTINGS
SWPosition
Mode
Serial
Analog
SWPosition
Mode
DC Iris
Video Iris
SWPosition
Mode
Internal
External
Bit
1
2-3
4-7
8
Mode
↓ ： C10
↑ ： Pelco-D
(Used for Pelco-D)
Baud rate *1
Address *2
Runaway
Protect
*1 00=2400,10=4800,01=9600,11=115200bps
*2 0000= ｱ Address 1 ～ 1111=Address 16
Bit
1
2-3
4-7
Mode
↓ ： Independent
↑ ： Common
00/01
10
11
： 12V/ ± 12V
： 12V/ ± 12V
： 12V/ ± 12V
Reserved
(1)
Adjustment of Video Iris
Adjust the video iris LEVEL and ALC using the
respective control trimmers.
⑦ ADJUSTMENT
Trimmer Name
Function
Adjustment Direction
LEVEL
Brighter
H （clockwise）
Darker
L （counter-clockwise）
ALC
Peak
Pk(clockwise)
Average
Av(counter-clockwise)
For more information on the arrangement of connectors and switches, see the illustration page.
1) Power Supply Connector
(OMRON XW4B-02B1-H1)
Pin
Signal
①
Power (DC12V)
②
0V (GND)
3) Analog Control Connector (OMRON XG4A-1635)
Pin
Common Mode
Independent Mode
1
Filter
2
GND
3
Zoom
＋ Wide
－ Tele
↑ Wide
↓ Tele
4
Common
5
Focus
＋ Far
－ Near
↑ Far
↓ Near
6
Common
7
Potentiometer Power Supply (Input)
8
Potentiometer GND
9
Focus Potentiometer Output
10
Zoom Potentiometer Output
11
0V (GND)
12
Iris Manual Remote (Input)
13 ～ 1
4
One key focus
⑤ CONNECTION INTERFACE
①
②
FUJINON H
D
32x1
2.2
lens is a high performance zoom lens for mega-pixel cameras which has been developed for
day/night cameras.
② FOR YOUR SAFETY
This section explains important notices about how to use this product safely. Before using this product, be sure to
read this section carefully and follow the instructions.
The following signs in the text indicate
WARNING and
CAUTION:
WARNING : Indicates the possibility of causing death or serious injury if the product is misused.
CAUTION : Indicates the possibility of causing injury or substantial damage if the product is misused.
WARNING
・ Do not allow the inside of the product to become wet or moist, as it may cause fire or electric shock. If this
occurs, immediately shut off the power supplied to the lens.
・ Do not use the lens to look at the sun or other powerful light sources. Doing so could cause eye injury.
・ Make sure all parts are mounted and fastened securely.
・ When using a heavy camera, be sure to secure the camera and lens securely to a tripod using the tripod mounts
on both the camera and the lens. Using only the tripod mount on the lens could damage the lens due to the
weight of the camera, or the camera could separate from the mount and fall, causing serious damage or an
accident.
CAUTION
・ Do not leave or store the lens in direct sunlight, as the lens may focus light on a nearby object and cause a fire.
・ Do not aim the lens toward the sun, as the sunlight may focus on the interior of the lens and damage the parts.
・ Before supplying power to the lens, make sure all the parts are connected correctly.
・ Take care when carrying the lens, as dropping it may cause injury.
・ Make sure the power supplied to the lens is of the rated input voltage; otherwise, a fire, electrical shock or
product damage may occur.
・ In order to install or release a cable, be sure to hold the joint part. Do not damage the cable by gripping. It
may cause fire or electric shock.
・ If any sorts of incidents such as unusual smoke, noise, smell or obstacles are found, shut off the power supplied
to the lens and detach the lens from the camera immediately. Please notify the sales agent from which you
purchased the product.
・ Do not remodel the instrument: it may impair the functions of product or cause electric shock.
Notices
・ Do not use this product for purposes beyond the uses mentioned in this manual.
・ The lens and its accessories are extremely precise instruments. Never subject them to strong impact.
・ This lens is designed for indoor use. When using the lens outdoors, always take proper measures including the
use of a protective cover.
・ The lens may fog when transported from a cool place to one of high temperature and humidity.
To avoid such fogging, before moving the lens allow it to adjust to the ambient temperature of the environment
of use.
2
) Iris Connector
(JEITA RC-5204A compliant, jack side)
Pin
DC Iris
Video Iris
1
Damping Coil －
－
2
Damping Coil ＋
－
3
Drive Coil ＋
Video Signal
4
Drive Coil －
GND
2
1
4
3
（JACK）
1
2
3
4
（CABLE:PLUG）
HD32x12.2R4A-CV2A
1:3.1/12.2.-390mm 1/1.8” C-Mount
1
5
RS485-
16
RS485+
