FujiFilm Frontier DE100 Скачать руководство пользователя страница 106

Страница: 106 / 188

5-18

- Frontier DE100 Operation Guide -

Replacing Ink Cartridges

5.2 Replacing Ink Cartridges

5.2.1 Checking Ink Levels

You can check the ink level in the Notification Message.

Displays the Notification Message.

“2.4.1 Notification Message Display Method” (Page 2-15)

Check how much ink remains.

When the ink remaining falls below the minimum value, the ink light on the front of the printer

turns on.

Also, an error message is displayed on the computer’s screen.

Icon

Explanation

There is sufficient

ink remaining.

The remaining ink
level is less than
20%.

There is

insufficient ink

remaining (less
than 1%).

Unknown because
the printer is

offline.

Click the [OK] button.

The Notification Message is closed.

Содержание Frontier DE100





























































































































































































Результаты поиска

Содержание Frontier DE100

Отзывы:

FujiFilm Frontier DE100, Руководство по эксплуатации, Страница: 106 / 188

Результаты поиска

Содержание Frontier DE100

Отзывы: