FujiFilm FP-Z5000, Основное руководство

Страница: 13 / 32

10
Installation
Installing the Projector in Vertical Orientation Installing the Projector in Vertical Orientation
Before installing the projector in vertical orientation, attach the
supplied stands.
b
TIP
The supplied stand does not incorporate a height-adjust-
ment mechanism.
Using the Stands Using the Stands
Before installing the projector in vertical orientation, attach the
supplied stands. Attach the stands using their built-in screws,
which screw into the attachment holes on the projector. When
attaching the stands, lay the projector fl at. The lens should be
in the storage position, the projector in standby mode, and the
power cable disconnected.
Open the legs after standing the projector on edge.
4
CAUTIONS
• Be careful not to drop the projector when lifting it to attach the stands.
• Attach the stands securely. When using the stands, be sure the legs are fully open. If the stands
are not securely attached or the legs are not fully open when the projector is oriented vertically,
the projector could become unbalanced and tip.