4.Adjustment and Check
FinePix6800Zoom(U/E/EG) SERVIS GUIDE
20
4-3-6.Reading from and writing to EEPROM
As with the remote controller for adjustment (RM95B),
this adjustment program allows data to be read from and
written to the EEPROM. The following is the procedure for
doing this.
(1)Start the user program and arrange so that there is com-
munication between the PC and DS camera.
(Note) Refer to the following for the procedure for start-
ing the user program.
(2)From the FFW.exe menu bar, click [Data] and select EVR.
(Fig. 14)
(This mode can be operated even when the user program
is in operation.)
Fig.14
(3)The EVR data is displayed.
The meaning of the items in the EVR data menu bar is
shown in Fig. 15.
Fig.15
(4)EVR data save/write
Click from the EVR data dialog box. (Fig. 17)
Fig.17
Fig.18
Fig.16
The example above shows when page 4 has been en-
tered and 02h has been entered.
Open the EVR file selection dialog box. (Fig. 18)
Select the location for saving, enter the file name
and click [Save]. (In the example, the file is being
saved in Fx6800Zoom of the C: drive under the file
name of "Fx6800" .
Click [Save] and the Rec. EVR dialog box will open.
(Fig. 19). The possible selections are: [Write file,
[Read file_write RAM] and [Read file_write ROM].
The following explains the meaning of each.
Select [Write file]. Check the required page (multiple
selections possible). (Fig. 19)
Writw file
Saves EVR data.
Read file
Sets the data value in the file.
Write RAM
(Does not write to file.)
Read file
Writes the data value
Write ROM
in the file.
Fig.19
*Up to page F is OK for FinePix6800Zoom.
Item
Description
Meaning
Switches the EVR data display between
decimal and hexadecimal.
Redraw
Redisplays the EVR data.
ROM read
Reads the EEPROM data.
ROM write
Writes data to EEPROM.
RAM read
Reads RAM data.
+1_RAM write
Increased the designated ad-
dress by +1. (Not performed
when writing data to EEPROM.)
-1_RAM write
Increased the designated ad-
dress by -1. (Not performed
when writing data to EEPROM.)
Record
Saves EVR data.
ROM screen
Reads one page (address
256h) of ROM data.
RAM screen
Reads one page (address
256h) of RAM data.
Page designation
Page designation (Moves to
designated page.)
Address designation
Address designation (Moves to
designated address.)
Switch between decimal and
hexadecimal display.
An actual example of when page or address designation is used
on the EVR data screen can be seen in Fig. 16 .
