FujiFilm FinePix30i, Руководство по обслуживанию

Страница: 27 / 48

27
4.Adjustment
FinePix30i(U/E/EG) SERVICE MANUAL
USB cable
D C 5 V
FinePix30i
4-2-3.Jig Connection Diagram
DC_IN Terminal
USB Terminal
Digital Voltmeter
(note1)
Power Cable Jig
Personal Computer
Reguratted power supply
(note1)Please sence input voltage at DC_IN terminal in case of System block adjustment.
4-2-4.Environmental Setting for adjustment
(1)Environmental Setting for Image System Adjustment(Fig.A)
<<Full White Pattern>>
Remove the chart from the pattern box. Position the
camera (lens surface when the power is on) and pattern
box so that they are separated by approximately 5 cm.
Arrange so that the standards for the pattern box are as
follows.
1. Brightness: 160+-5 cd/m 2 (with LB140 filter)
No chart – Center of pattern box.
Minolta luminous meter LS-110
2. Color warmth: 6100+-50
o
K (with LB140 filter)
No chart – Center of pattern box.
Minolta colormeter F
(2)Environmental Setting for Flash Adjustment/
Inspection(Fig.B)
The strobe adjustment is easily affected by other
sources of light. Make the area around the gray chart
extremely dark to minimize the affects of other sources
of light.
Position 100 cm from the camera (lens surface).
Gray chart standards
Gray chart should be Superior Oxford Gray (No. 22) and
camera
Body
Filter(LB140)
Pattern
BOX
45+-5
mm
Fig.A
Gray chart
100cm
camera
Body
Fig.B
10+-5
mm