89
The Setup Menu
Men
u
s
v
v
ADD NEW STAMP
ADD NEW STAMP
Copy stamp fi les for
Q
STAMP
mode from a
memory card.
Stamp Files
Stamp fi les can be found in the “FF_STAMP” folder on
the supplied FinePixViewer CD. Copying these fi les
to the camera is a two stage process: fi rst, use a com-
puter equipped with a card reader or memory card
slot to copy the fi les from the CD to a memory card,
then insert the memory card in the camera and copy
the fi les to the camera using
v
ADD NEW STAMP
.
Stamp fi les can not be copied directly from the com-
puter to the camera.
Caution
If the installer starts when the FinePixViewer CD is in-
serted in a CD-ROM drive, click
Cancel
to exit.
1
Insert the memory card containing the stamp
fi les in the camera and select
v
ADD NEW
STAMP
in the setup menu.
2
Press the selector left or right to
display the desired stamp.
SELECT STAMP
OK
CANCEL
0
4
SET/RESET
3
Press the selector up to select or
deselect the current stamp. Se-
lected stamps are indicated by a
check mark.
1
4
SELECT STAMP
OK
CANCEL
SET/RESET
