77
Software
Installation
76
SET–UP
FRAME NO.
CCD-RAW
CONT. :
Pictures are stored beginning from the
highest file number stored on the last
xD-
Picture Card
used.
RENEW :
Pictures are stored on each
xD-Picture
Card
beginning with a file number “0001”.
Setting this function to “CONT.” makes file
management easier as it ensures that file names
are not duplicated when images are downloaded to
a PC.
●
!
If the
xD-Picture Card
already contains image files with file
numbers higher than the highest file number on the last
xD-
Picture Card
, images are stored beginning from the highest
file number on the current
xD-Picture Card
.
A
A
B
B
CONT.
RENEW
Formatted
xD-Picture Card
used for both
A and B.
You can check the file number by viewing the
image. The last 4 digits of the 7-digit number in the
top right corner of the screen are the file numbers,
while the first 3 digits show the directory number.
●
!
When replacing the
xD-Picture Card
, always switch the
camera off before opening the battery cover. Opening the
battery cover without switching the camera off may prevent
the Frame number Memory from functioning.
●
!
File NO. run from 0001 to 9999. Once 9999 is exceeded, the
directory number changes from 100 to 101. The maximum
number is 999–9999.
●
!
The displayed frame number may differ for images
photographed on other cameras.
●
!
If the “
æ
” message appears, see P.101.
Setting CCD-RAW to ON disables the signal processing functions (reconstituting the data received
from the CCD as an image) performed on the camera. Consequently, this task must be performed
on the computer.
Use the bundled RAW FILE CONVERTER LE software to perform the processing on a computer.
Conversion using RAW FILE CONVERTER LE also provides a simple way to create TIFF-format
images.
✽
To rebuild images, FinePixViewer (on the bundled CD-ROM) must be installed on your computer.
■
The functions listed below cannot be used in CCD-RAW mode.
During shooting
Digital zoom, continuous shooting, and FinePix Photo mode (image quality, sensitivity (ISO
800) and FinePix COLOR) are unavailable.
During playback
Playback image quality is fixed at
1
(1280
×
960).
Playback can be zoomed up to 800%, but cropped images cannot be saved.
７／２１／２００３ １２：００ＰＭ
７／２１／２００３ １２：００ＰＭ
１００−９９９９
１００−９９９９
Directory number
File number
Frame number
5.1 THE SOFTWARE COMPONENTS
5
Software
Installation
Software needed for playing back movies, etc.
Launches the FinePixViewer
software when a camera is
connected.
Software used to read PDF-format documents on a personal computer. This software is needed to read the User’s
Guides for FinePixViewer. (Macintosh only)
Creates a FinePix CD Album.
Converts CCD-RAW files to
Exif-TIFF format.
Used for videoconferencing (Windows only).
Allows you to display thumbnail lists of the images stored on your PC or in the camera, print the images
individually or as an index, display the images at full size and perform some basic image processing.
✽
Note that the software configuration differs slightly depending on your operating system.
Connect the camera
with “ ” selected
as the USB setting
(
➡
P.88).
Connect the camera
with “
q
PC” selected
as the USB setting.
Allows a digital camera to be used
as USB Mass Storage (removable
disk drive, card reader).
Allows a digital camera to be
used as a PC Camera.
ImageMixer VCD
for FinePix
RAW FILE
CONVERTER LE
Acrobat Reader
R
R
QuickTime
USB PC Camera
Driver
Exif Launcher
USB Mass Storage
Driver
FinePixViewer
PictureHello
Содержание FinePix S5000
Страница 56: ......
