FujiFilm FinePix FinePix S6500fd, Руководство по обслуживанию

Страница: 117 / 138

5-5
5. Inspection
FinePix S6000fd/S6500fd Service Manual
Sequemnce Item Mode Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equipment and jigs
Measurement points
(VRs, positions)
11
12
13
14
Initialization
LCD dust/defect
check
Battery low check
Current
consumption
check
Playback
Movie
Auto mode
LCD-ON
(1) Set Macro mode to the
default setting.
(2) Set the flash mode to
AUTO.
(1) Insert a standard xD-
Picture card.
(2) Play back a completely
black image.
(3) Play back a completely
white (75%) image.
(4) Change the setting with
the EVF/LCD button.
(1) Connect the power supply
jig to the DC IN terminal.
(2) Set the power supply
voltage.
(3) Set the Mode dial to Movie
mode and turn the camera
on.
(4) Set the pre-end voltage.
(5) Set the end voltage.
(1) Connect the power supply
jig to the DC IN terminal.
(2) Set the power supply
voltage.
(3) Set the Mode dial to AUTO
and turn the camera on.
(4) After the LCD live image
appears, check the current
consumption.
(1) 4-way button (left)
operation: Check that the
Macro icon OFF appears
on the LCD monitor.
(2) Press the 4-way button
(right) and check that
“AUTO” appears on the
LCD monitor.
(2) Check that there are no
noticeable dust flecks or
stains (bright spots,
smears, flashing points,
etc.) on the screen.
(4) Play the above 2 frames
and perform the same
checks.
(2) 5.00V ± 0.10V
(3) Check that the camera
starts up normally.
(4) 4.40V ± 0.10V
Check that the battery low
warning appears.
(5) 4.00V ± 0.10V
Check that the camera
turns off.
(2) 5.00V ± 0.05V
(4) 550 mA or less
(Stable state -> IRIS/
FOCUS does not operate)
ZJ00885-100