47
Settings
4
46
When the camera is in Sleep mode, pressing “
a
”,
“
b
”, “
d
” or “
c
” wakes the camera up. This is
useful since the camera can be ready to take
pictures instantly. Pressing also the Shutter button
wakes the camera up.
●
!
Pressing any other button as well as “
a
”, “
b
”, “
d
” and “
c
”
wakes the camera up.
ＰＯＷＥＲ ＳＡＶＥ
ＰＯＷＥＲ ＳＡＶＥ
２ ＭＩＮ
２ ＭＩＮ
ＦＯＲＭＡＴ
ＦＯＲＭＡＴ
: ＯＫ
ＯＫ
ＯＮ
ＯＮ
ＬＯＷ
ＬＯＷ
ＩＭＡＧＥ ＤＩＳＰ．
ＩＭＡＧＥ ＤＩＳＰ． :
ＢＥＥＰ
ＢＥＥＰ
:
2
3
1
4
ＳＥＴ−ＵＰ
ＳＥＴ−ＵＰ
ＳＥＴ
ＳＥＴ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
When this function is enabled, the screen
temporarily turns off (Sleep mode) and the
viewfinder lamp (green) blinks at 1-second intervals
to save power if the camera is not used for 30
seconds. If the camera remains unused for an
additional interval (2 or 5 minutes), it is turned off.
Use this function when you want to get the maximum
possible running time from your batteries.
●
!
The Power save setting is disabled during automatic
playback, during rechargeable batteries discharging and
when a USB connection is being used.
POWER SAVE SETTING
The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it
is left unused for a set some time (2 or 5 minutes).
◆
To restore power to the camera
◆
To take pictures, briefly close and then re-open the
lens cover. To play back images, close the lens cover
then hold down “Playback” button for approx. 1
second.
ON
OFF
SET-UP
■
SET-UP menu options
IMAGE DISP.
1
2
3
4
ON/OFF
ON
Specifies whether an image checking screen (photography result)
appears after taking a picture.
The image appears for a few moments and then recorded.
POWER SAVE
2 MIN/5 MIN
2 MIN
Reduces the camera’s power consumption and to subsequently
turn the camera off when not being used. See P.47 for details.
FORMAT
OK
–
Erases all files. See P.47 for details.
§
BEEP
LOW/HIGH/OFF
LOW
Sets the volume of the tone emitted when the camera controls
are used.
DATE/TIME
SET
–
Corrects the date or time. See P.14 for details.
TIME
DIFFERENCE
SET
–
Specifies the time difference settings. See P.48 for details.
q
LCD
ON/OFF
ON
Specifies whether the LCD monitor is ON or OFF when the
camera is turned on in Photography mode.
FRAME NO.
CONT./RENEW
CONT.
Specifies whether frame numbers are assigned consecutively
from previous numbers or begin again. See P.49 for details.
USB MODE
¶
/
q
WEB/
¢
¶
Selects the function when the camera is connected to a computer
or a printer. See P.58 for details.
ENGLISH
Specifies the language used for LCD monitor display.
VIDEO SYSTEM
NTSC/PAL
PAL
Specifies whether video output is set to NTSC or PAL.
q
RESET
OK
–
Resets all the camera settings (other than the DATE/TIME, TIME
DIFFERENCE, LANG. and VIDEO SYSTEM) to the factory
default values set at shipment. A confirmation message appears
when you press “
c
”. To reset the camera settings, press the
“MENU/OK” button again.
DISCHARGE
OK
–
Discharges rechargeable batteries. See P.72 for details.
Settings
Display
Factory default
Explanation
FORMAT
Formatting erases all the frames (files).
Initialize the
xD-Picture Card
for use in the
camera.
Back up important frames (files) onto your
computer or another media.
1
Press “
d
” or “
c
” to select “OK”.
2
Pressing the “MENU/OK” button erases all the
frames (files) and initializes the
xD-Picture
Card
.
Formatting erases protected files also.
ＦＯＲＭＡＴ
ＦＯＲＭＡＴ
ＦＯＲＭＡＴ
ＦＯＲＭＡＴ ＯＫ？
ＯＫ？
ＥＲＡＳＥ
ＥＲＡＳＥ ＡＬＬ
ＡＬＬ ＤＡＴＡ
ＤＡＴＡ
ＯＫ
ＯＫ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
ＳＥＴ
ＳＥＴ
●
!
If “
å
”, “
˚
”, “
ƒ
” or
“
©
” appears, see P.74 for information
before formatting the
xD-Picture Card
.