FA65
安全情報
Product specific instructions
Operation
See figures on page 2.
•
Fix the accessories properly to the tool.
•
Connect device to a clean and dry air supply.
•
See figure 02 to operate the tool.
Lubrication
Use an air line lubricator with ISO VG32 turbine oil or
equivalent, adjusted to two (2) drops per minute.
Disposal
•
The disposal of this equipment must follow the
legislation of the respective country.
•
All damaged, badly worn or improperly functioning
devices MUST BE TAKEN OUT OF OPERATION.
•
The disposal of this equipment must follow the
legislation of the respective country.
•
Repair only by technical maintenance staff.
Maintenance instructions
•
Follow local country environmental regulations for
safe handling and disposal of all components.
•
Maintenance and repair work must be carried out
by qualified personnel using only original spare
parts. Contact the manufacturer or your nearest
authorised dealer for advice on technical service or
if you require spare parts.
•
Always ensure that the machine is disconnected
from energy source to avoid accidental operation.
•
Disassemble and inspect the tool every three 3
months if the tool is used every day. Replace
damaged or worn parts.
Useful information
Website
Log in to Fuji:
You can find information concerning our products,
accessories, spare parts and published matters on our
website.
Country of origin
Japan
Copyright
© Copyright
2020, Fuji Industrial Technique Co., Ltd,
2-1-14, Kamiji, Higashinari-ku, OSAKA 537-0003,
JAPAN
All rights reserved. Any unauthorized use or copying of
the contents or part thereof is prohibited. This applies in
particular to trademarks, model denominations, part
numbers and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or
Product Liability.
©
Fuji Industrial Technique Co.,Ltd. - 9502001184
7
