12
3. Drop the film in all the way
A : Film Tip Mark
•
Press the film lightly with your finger and it will drop smoothly down into place, guided by the
Camera Back.
•
Make sure the film tip falls within the Film Tip Mark (green lines in the far end of the film track)
and gently drop in the cartridge.
•
If the length of film protruding the cartridge is too short or too long, adjust it so that the film tip
falls within the camera’s Film Tip Mark before loading the film into the camera. To adjust, just
wind it in or pull it out..
4. Close the camera back
As soon as you close the Camera Back, the Exposure Counter will run through
rapidly and the film will prewind itself up to the very end. (If the film is a 24-expo-
sures roll, it will prewind itself in about 20 seconds.) The Exposure Counter will
show the number of exposure that can be taken with your film.
•
The Film Confirmation Window will show the type of film that is loaded in the camera, as well as
its speed and the number of exposures it contains.
•
Open the Camera Back all the way only when you want to clean the camera interior.
2. Insert the film
(If the film leader is curled, just ignore it.)
Hold the film cartridge with the protruding end up as shown and insert it about
halfway into the Film Chamber.
Содержание Discovery 312 ZOOM DATE
Страница 1: ...LOADING OWNER S MANUAL PANORAMA...