FujiFilm ClearView CS, Руководство по обслуживанию, Страница: 185 / 1404

Error
Code
Error Name Occurrence Condition
Analysis
Flow
CR-IR 363
Service Manual
MT-28
MT-28
011-202-11E
06.29.2012 FM6046
11366 Load IP suction error (1)
During bootup/routine processing/M-Utility/abnormality processing, the IP suction pump (PA1/2/3/4) is driven to load
the IP to the cassette; however, the suction sensor (SA5/11/17/23) does not transition to OPEN within the specified
period of time. Though the retries (twice) are executed, the IP cannot be sucked.
{MT:4.26}
11367 Load IP suction error (2) (drop)
During bootup/routine processing/M-Utility, the IP is sucked to perform suction conveyance of the IP from the
feed/load conveyor unit to the cassette; however, the CLOSE state (IP drop) of the suction sensor (SA5/11/17/23)
is detected during IP conveyance. Though the retries (twice) for the IP suction are executed, the IP drop is detected
again.
{MT:4.26}
11425 Initialization cassette status error
During bootup, the IP is detected in the cassette set unit; however, the OPEN state of the cassette IN sensor
(SA2/8/14/20) or the CLOSE state of the cassette hold sensor (SA3/9/15/21) is detected for the confirmation of the
presence of cassette, so that inconsistency of the sensor status is detected.
{MT:4.21}
11459 Initialization IP position
information error
During bootup, the CMOS information (IP found) of the machine does not coincide with the remaining IP search
processing result (IP not found), so that the user is notified.
{MT:4.36}
11490 IP is overexposed
An overexposed IP was detected during bootup or routine processing.
-
11493 Dummy cassette ejection request
During bootup, a dummy cassette is detected, and ejection of the cassette is requested.
-
11494 Dummy cassette request As no dummy cassette is detected upon termination, and insertion of the dummy cassette is requested.
-
11495 Remove an empty cassette An empty cassette was detected during bootup.
-
11496 Unread IP was ejected
A cassette was loaded while the CL was not ready for reading.
-
11498 Empty the largest cassette and
insert the cassette
<User operation>
The IP size was unknown or the ejection destination cassette was not found during bootup.
<Action>
Insert an empty cassette.
-
11499 IP reading suspended
A remaining IP that could not be returned as an unprocessed IP was detected at a position behind the subscanning
unit during bootup.
The error code is displayed in the LCD but not logged in the ERROR DB.
{MT:4.37}
11510 Unread IP ejection (1)
<Faulty phenomenon>
The IP can be conveyed during secondary erasure but is ejected to the cassette without being read during routine
processing.
<Occurrence conditions>
This error occurs if CL CONFIG setup is performed to select “0: 1-1” for “21. Connecting Between Reader and
Console” under “1. IMAGE MODALITY”.
<Servicing>
The IP is ejected into a cassette without being read due to a cause attributable to the CL during routine processing.
The IP is conveyed to the side-positioning conveyor and returned to the cassette without being read.
-