background image

SPECIFICATIONS

Displacement: 5.2cu. in. (86cc)
Horsepower:

7.5HP  / 9000rpm

Ignition Style: CDI Automatic 

Ignition Timing

R.P.M.:

1100 – 9000rpm 

Fuel:

40:1 Mixed Gasoline

Weight:

5.8 lb. (2.6kg)
w/o Muffler

FEATURES

Manufactured by FUJI IMVAC INC.

YOKOHAMA, 235-0005 JAPAN

Worldwide Distributor 

(except Japan)

: Hobbico, INC.

Champaign, IL 61826 USA

www.fujiengines.com

Entire Contents © Copyright 2001

FJIZ8600  for  FJIG0086 V1.1

The BT-86 engine features an electron-
ic ignition system. This system gradu-
ally delays the ignition timing according
to the number of ignition pulses,
increasing with the engine speed. The
fuel mixture is ignited at almost top
dead center when idling  and the timing
is gradually increased as the revolu-
tions increase.

Decompression Valves
The valves are located in the center part
of each cylinder.

Pressing this valve

(one or both) before starting will
decrease compression at starting. The
valve on the firewall side may be operat-
ed by a servo for easier operation.
Always use the valves when using an
electric starter. The valves are closed
automatically as the engine fires. For
restarting, press the decompression
valves again to open them.

Operator's Manual for BT-86

Содержание BT-86









Отзывы: