FujiFilm Apeos C3070, Справочное руководство

Страница: 25 / 58

25
2.2 Direct Print
2.2 Direct Print
This function is used to print files directly by using lpr commands, etc. instead of a printer driver.
There are two types of PDF direct print, including Adobe genuine PDF direct print and PDF direct
print provided by our company (PDF Bridge).
Note

In order to use Adobe genuine PDF direct print, you need the Adobe
®
PostScript
®
3
TM
kit.

When using lpr commands, set > [Device] > [Network Settings] > [Port Settings] > [LPD] > [Port
Status] to [Enabled].
Direct Print Mode Setting
The unique settings for each direct print modes can be changed in > [Device Status] > [Print
Mode].
Note
 You can follow the same procedure for the PDF emulation mode with Internet Services.
Programming
Enter the Item Number for the function in [Item Number] to display the current setting.
Enter the new value in [New Value] and tap on [Save] to change the setting.
If you are printing a PDF file without using ContentsBridge Utility, our software, this setting becomes
valid.
Note

If you are printing a PDF file with ContentsBridge Utility, refer to [Support Tools/Manuals] > [Media
Information] in
Software/Product Manual .

If you using ContentsBridge Utility, only “Print process mode” will be enabled.
Refer

Refer to "Items" (P.25) for Item Number.
Password
If you set up a password, you can print PDF files secured with a password.
Note
 The password should be 32 or fewer alphanumerics or symbols.

Depending on the PDF file security setting, the file may not be printable.
Items
Items Item Number Specification value
PDF DocuWorks
Number of
outputs 401 501 [1] to [999] : 1 to 999
Note
 If printing using lpr commands, the specification of the
number of outputs is made with lpr commands. Due to
this, this setting will be invalid.
2 sided 402 502 [0] : None
[1] : Long side binding
[2] : Short side binding