manualshive.com logo in svg

FUJIDENZO IJWA-1050T, Руководство по обслуживанию

Поделиться
Скачать
FUJIDENZO IJWA-1050T Скачать руководство пользователя страница 8

Connect the inlet hose connector with the inlet hose

Check the connection between inlet hose 
connector and the tap

Inlet valve connector

Inlet hose nut

Water absorption cushion

Lock lever

Inlet hose connector 

Slider

1. Push down the slider, insert the inlet hose into the connector
2. Hang the lock lever to the inlet hose connector and release
     the slider till a click sound is heard.    

1. Swing the inlet hose gently to confirm if it is fastened.  
2. After installation, open the tap and check if it leaks.
3. Do not bend the inlet hose with overstrain. 
4. Before each usage, check the connection between
    inlet hose connector and the tap, and the installation 
    of inlet hose. Make sure they are firmly fitted to prevent
    dropping from improper installation position.

Slider

Lock lever

Connect the inlet hose with the washing machine

1. Do not take off the water absorption cushion. Please 
    check if the cushion is dropped or damaged before
    each usage. If it is, contact the seller immediately.
2. Put the inlet hose nut on the inlet  valve connector.
3. Fasten the inlet hose nut and swing it gently to make
     sue if it is suitable.

1. Close the tap.
2. Press the locking lever, push down the slider, and pull of the 
     inlet hose. If the machine is used frequently, the connector
     of the inlet hose can be kept on the tap to prevent  damaging 
    the fixing screw.   

Dismantle the inlet hose

Cautions:

W

hen install the washing machine, please use the new hose assy along with the washing 

                      machine, old hose assy can not reuse.

The points for installation, adjustment and disassembly

The points for installation, adjustment and disassembly

7

Содержание IJWA-1050T

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды