FUJIDENZO FIP-400M, Руководство пользователя и инструкция по установке

Страница: 13 / 40

The test running operation will last 30 minutes regardless of the setting temperature. In this
case, press the ADJUST button to check the protective code of T1,T2, T3 and T4(For Cooling
& Heating models only).
If press " " or " "button:
AUXILIARY FUNCTION button （ some models ）:
Use this button to select or cancel the auxiliary feature.
Press this button, then press the " " " " or " " " " button to select the desired
feature. Each time the button is pressed, the mode is shifted in the direction of the arrow:
If press " " or " "button:
Manual
Operations
 Page 13 
5
This feature is available both when the unit is turned on or off. The first time these buttons are
pressed, the unit locks and all other buttons on the unit are disabled (apart from the unlock
button). Please note that the remote control can still be used when the unit is locked.
LOCK :
Press and hold and buttons together will initiate lock feature. Press the
button of the panel and the lock icon will blink for 5 seconds when these buttons
are pressed again the unit is unlocked.
All the current settings are locked in but the remote controller operation is available.
And the LOCK indicator illuminates. Push it again to cancel the LOCK mode.
Press and hold FAN and AUXILIARY FUNCTION buttons together will initiate test running
feature.
6
7
Once the desired feature is established, press the AUXILIARTY FUNCTION button again to register .
NOTE :
Some functions is disabled when the unit is turned off or under certain mode,
the operation mode shifts to the next automatically.
(B)
(B)
(A)
(B)
(A)
(B)
(A)
(A)
(some models)
(some models)
TEST RUNNING
: This feature is specially designed for maintenance technicians.
Press this button to perform test running operation, press it again to stop the operation.
Press this button to perform LOCK operation, press it again to stop the operation.