Fujian Helios Technologies Co. TD-LTE 2300MHz, Руководство пользователя

Страница: 14 / 23

Fujian Helios Technologies Co., Ltd.
www.heliostelecom.com 14

Device has been detected on the COMx port, the baud rate is 9600bps : When
the software is open, it will automatically search available COM port and check if
it’s connected to valid TD-LTE ICS Pico Repeater. “
Device has been detected on
the COMx port, the baud rate is 9600bps
” means the Pico Repeater is well
connected and users can get information and set parameters now.

PC does not have serial port
:“
PC does not have serial port
” means there’s no
available COM port in the laptop and users should insert one USB-RS232
converter and try again.
Refresh : Click
“Refresh” to update the basic information.
11.6 Alarm Info
The “Alarm Info” window shows all detailed information of working status.

Out of Synchronization : Out of synchronization alarm

VCO Unlock : VCO unlock alarm

Over Temperature : Over temperature alarm (default alarm threshold: 85 degree
Celsius)

Input Under Power : Timeslot 1 input power is lower than Sync Threshold

Input Saturation : Timeslot 1 input power is higher than the threshold that the
output power reaches the maximum

Input Overdrive : Timeslot 1 input power is higher than -25dBm

Output Overdrive : Timeslot 1 Output power is higher than 25dBm

Refresh : Click to update working status

Normal : Working status is normal in green

Alarm : In case of alarm items in red, it will switch off the Pico Repeater

Warning : In case of warning items in yellow, it shows warning information only
and the Pico Repeater will continue to be working
11.7 Timeslot Set
As per 3GPP standard, each radio frame consists of 20 Timeslots whose detailed
information can be viewed and set individually.