Fuji Xerox Phaser 5500, Руководство по обслуживанию

Страница: 129 / 623

Error Messages, Codes, and Procedures 3-51
Jam at D and A - C6-1 Duplex Area Jam
Paper being fed from the Duplex Unit did not reach the Registration Sensor, located
behind Door A, on time.
Applicable Error Code
Jam at D and A - C6-1 Duplex Area Jam
17 Test the Wait Sensor.
Run the Service Diagnostics Duplex Wait
Sensor test.
Does the Wait Sensor operate properly? Replace the
Engine Logic
Board
(page 8-89). Go to Step 18.
18 Check the Wait Sensor connection.
Are P/J123 and P/J541 connected? Go to Step 19. Connect P/J123
and P/J541.
19
Check continuity between the Wait Sensor
and Duplex PWB.
Is there continuity on each wire
between P/J123 <=> P/J541? Go to Step 20. Repair the wiring.
20 Check for +5 V to the Wait Sensor.
Is there +5 V across P123-3 (+) <=>
ground? Replace the Wait
Sensor
(page 3-78). Go to Step 21.
21 Check the Duplex PWB connection.
Are P/J540 and P/J417 connected? Go to Step 22. Connect P/J540
and P/J417
surely.
22 Check continuity between the Duplex PWB
and Engine Logic Board.
Is there continuity on each wire
between P/J540 <=> P/J417? Go to Step 23. Repair the wiring.
23 Check for +5 V to the Duplex PWB.
Is there +5 V across P/J540-1 (+) <=>
ground? Replace the
Duplex PWB
(page 3-77). Replace the
Engine Logic
Board
(page 8-89).
E8-2 Duplex Area Jam Troubleshooting Procedure (Continued)
Step Actions and Questions Yes No