Safety Notes
11
IE
IE
For Power & Earth Connection
The power specifications are listed below.
The specifications that apply to your
machine depend on your machine
configuration. Connect the power plug only
to a properly rated power outlet. Otherwise,
it can cause fire or electric shock. If in
doubt, contact our Customer Support
Center.
• Rated voltage 100 - 240 Vac
Rated frequency 50/60 Hz
Ensure that the plug connection is free of
dust. In a damp environment, a
contaminated connector can draw a non-
negligible amount of current that can
generate heat and eventually cause fire
over an extended period of time.
Always use the power cord provided with
your machine. When an extension power
cord is required, always use a properly
rated cord.
• In Japan: 125 V/15 A
• In other countries: Contact our Customer
Support Center.
If you use a cord with an unspecified
current rating, the machine or plug may
emit smoke or become hot to the touch
externally.
Only use the power cord supplied with the
equipment.
Do not use it on any other power source,
doing so can cause fire, electric shock or
machine faults. Using a different power
cord may cause fire or electric shock. Do
not use power cord supplied with the
equipment on any other equipment.
Do not attempt to rework, pull, bend, chafe,
or otherwise damage the power cord. A
damaged cord can cause fire or electric
shock.
If the power cord is broken or insulated
wires are exposed, ask our Customer
Support Center for a replacement. Using a
damaged cord can cause fire or electric
shock.
Never touch a power cord with wet hands.
Danger of electric shock exists.
Stop operation immediately if your
machine produces smoke, excessive heat,
unusual noise, or smell, or if water is spilt
onto the machine. These conditions can
cause fire. Immediately switch off and
unplug the machine, and contact our
Customer Support Center.
This product must be connected to a
protective earth circuit. This product is
supplied with a plug that has a protective
earth pin. This plug will fit only into an
earthed electrical outlet. This is a safety
feature. To avoid risk of electric shock,
contact your electrician to replace the
electrical outlet if you are unable to insert
the plug into it. Never use an earthed
adapter plug to connect the product to an
electrical outlet that lacks an earth
connection terminal. Improper connection
of the equipment-grounding conductor can
result in an electric shock.
If the power cord is broken or insulated wires
are exposed, ask our Customer Support
Center for a replacement. Using a damaged
cord can cause fire or electric shock.
Do not unplug or replug the machine while
it is on. Unplugging a live connector can
deform the plug and cause fire.
When unplugging the machine, grasp the
plug instead of the cord. Forcibly pulling on
a cord can damage it and cause fire or
electric shock.
Be sure to switch off and unplug the
machine before accessing the interior of
the machine for cleaning, maintenance, or
fault clearance. Access to a live machine's
interior can cause electric shock.
When the machine is not used over an
extended period of time, switch it off and
unplug it. If an unused machine is left
connected to a power source for a long
period, degraded insulation can cause
electric shock, current leakage, or fire.
