Fuji Xerox DocuPrint M105 ab, Руководство пользователя

Страница: 167 / 415

Copying 166
„ Lighten/Darken
You can adjust the copy density level to make the copy lighter or darker than the original.
1
For the DocuPrint M105 f/M105 ab, load the document(s) face up with top edge in first into the
ADF or place a single document face down on the document glass, and close the document
cover.
For the DocuPrint M105 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M105 f/M105 ab Only)" on page 158
• "Making Copies From the Document Glass" on page 156
2
Press the ( Copy ) button.
3
Select
Lighten/Darken
, and then press the button.
4
Select the desired setting, and then press the button.
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
5
If necessary, customize the copy settings including the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 159
6
Press the ( Start ) button to begin copying.
Lighter2 Makes the copy lighter than the original. Works well with dark print.
Lighter1
Normal*
Works well with standard type or printed documents.
Darker1 Makes the copy darker than the original. Works well with light print or
faint pencil markings.
Darker2