Fuji Xerox DocuPrint CM225FW, Руководство пользователя

Страница: 180 / 344

180 Faxing
 Sending a Fax Automatically
1
Load the document(s) facing up with top edge in first into the ADF or place a single document facing down on
the document glass and close the document cover.
See also:
• "Loading an Original Document on the ADF" on page 176
• "Loading an Original Document on the Document Glass" on page 177
2
Press the ( Services Home ) button.
3
Select
Fax
.
4
Adjust the document resolution to suit your fax documents.
See also:
• "Resolution" on page 178
• "Inserting a Pause" on page 179
5
Select a fax number in one of the following ways:
• Select , and then select one of the following:
Device Address Book - Individuals
- Select an individual fax number and then select
OK
.
Device Address Book - Groups
- Select a group dial number and then select
OK
.
Search Network Address Book
- Search and select a fax number from the LDAP server and then
select
OK
.
• Select .
Enter the speed dial number using the number pad, and then select .
NOTE:
• For more information on address book and server address book, see "Address Book" on page 195.
• The fax number needs to be registered before you can select Address Book.
6
Press the ( Start ) button.
When the document is placed on the document glass, the display prompts you for another page. If you want to
place a new document, replace the document with a new document, and then select
Scan Another Page
.
When you have finished loading documents, select
Done. Fax Now
.
The printer starts dialing the number, and then sending the fax when the remote fax machine is ready.
NOTE:
• Press the ( Stop ) button to cancel the fax job at any time while sending the fax.