Fuji Xerox DocuColor 5065II, Руководство пользователя

Страница: 121 / 416

Job Assembly
119
Cop
y
4
Job Assembly
On the [Job Assembly] screen, you can configure the Build Job and Sample Set
features. The following shows the reference section for features that can be configured
on [Job Assembly].
Build Job (Making Copies of Documents with Different Settings in a Single Operation)...... 119
Sample Set (Checking the Finished Output of the Copy) ........................................................ 122
Combine Original Sets (Adding Originals).............................................................................. 123
Delete Outside/Delete Inside (Deleting Outside or Inside of the Selected Area when Copying)
.................................................................................................................................................. 124
Stored Programming (Calling a Stored Program for Build Job).............................................. 126
1
On the [All Services] screen, select
[Copy].
2
Select the [Job Assembly] tab and
then select a feature on the [Job
Assembly] screen that appears.
Build Job
(Making Copies of Documents with Different Settings in a Single Operation)
This feature allows you to change and save settings individually for each document
page or stack and then to finally make copies of documents with different settings as
one job.
Important • When using tab stock with [Covers], [Tab Margin Shift], or [Separators] selected, [Output
Orientation] must be set to [Face Down].
1
Select [Build Job].
2
Select [On].
3
Select items as necessary.
Note • Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
„ Off
Build Job is not applied.
„ On
Build Job is applied. The feature buttons appear on the screen. The settings for the
entire document are set first.