Fuji Xerox ApeosPort-IV C4430, Руководство пользователя

Страница: 297 / 393

Printing Files in a Folder
297
S
end fr
om F
o
lde
r
6
For information on how to preview a file, refer to "Checking File Details" (P.295).
„ Print Quantity
Specify the number of print sets.
„ Print
Prints the selected file.
Batch Print
Allows you to set batch printing.
You can print multiple files as one file. Up to 100 files can be bound in the selected
order.
Note • For 2-sided printing, the last page becomes blank when the total number of printed pages is
odd. For printing of multiple files, a blank page is inserted after the final page of each file.
• If a different size document is included in multiple files, it may be printed in improper
orientation.
• [Batch Print] is not available while interrupting another job.
• [Batch Print] is not available for files received by fax or Internet Fax, or files for Secure
Polling. When the selected files contain fax or Internet Fax files, the machine will not print
the fax or Internet Fax files but only the scan and print files.
„ Paper Supply
Allows you to select paper.
„ 2 Sided Printing
Allows you to set 2-sided printing.
„ Staple
Allows you to set stapling.
The number of sheets that can be stapled is 2-50 (when
80gsm paper is use).
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
For example of the settings of stapling, refer to "When stapling" (P.297)
„ File Details
Displays the [File Details] screen. Select a file from the list to check its preview image.
For information on how to preview a file, refer to "Checking File Details" (P.295).
„ Print Quantity
Specify the number of print sets.
„ Print
Prints the selected file.
When stapling
The following table shows the stapling positions for print files stored in a folder by
specifying [Store in Remote Folder] on a print driver, and for scan files. The following
uses the example of [1 Staple].