Fuji Xerox ApeosPort-II C5400, Руководство пользователя

Страница: 64 / 256

3 Copy
62
Co
py
3
When you select [Standard Size] or [Custom Size], refer to "When [Standard Size] is Selected" (P.62)
and "When [Custom Size (Variable Size)] is Selected" (P.62).
Note • [Auto Size Detect] is available for standard size paper only.
„
Paper Type
Select a paper type.
When [Standard Size] is Selected
Select a paper size from standard paper sizes, and then select a paper type.
1
Select a paper size and a paper
type.
Note • Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
When [Custom Size (Variable Size)] is Selected
Set the X (width) within the range from 148 to 488 mm, and the Y (height) within the
range from 100 to 330 mm in 1 mm increments.
Important • If the X (width) of non-standard size paper is less than 140 mm, documents may not be
printed properly.
1
Enter a paper size using [ ], [ ],
[ ], and [ ].
2
Select a paper type.
Note • Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
Output Color (Selecting a Color Mode)
This feature allows you to select copy colors.
Note • If output color restrictions have been set, the available colors are restricted. For information
about output color restrictions, refer to Account Limit in Chapter 10 System Settings of the
Administrator Guide.
1
Select [Output Color].