Fuji Xerox ApeosPort-II C5400, Руководство пользователя

Страница: 113 / 256

Job Assembly
111
Co
py
3
„
Chapter Start...
Displays the [Build Job - Chapter Start] screen.
Refer to "[Build Job - Chapter Start] Screen" (P.113).
„
Insert Separators...
Displays the [Build Job - Separators] screen.
Refer to "[Build Job - Separators] Screen" (P.111).
„
Change Quantity...
Displays the [Build Job - Change Quantity] screen. Enter a new quantity using the
numeric keypad.
„
Cancel
The document data stored by the Build Job feature is cleared and the job is cancelled.
Note • The same operation is performed if you press the <C (Clear)> or <Clear All> button on the
control panel.
• While scanning the loaded document, [Stop] is displayed. Select [Stop] to pause scanning.
Select [Start] in the touch screen, or press the <Start> button on the control panel to resume
scanning.
„
Last Original
Select this to end scanning of documents. The build job starts.
„
Next Original
Select this when you have another document. This item is selected when using the
Build Job feature.
„
Start
When loading the next document and select [Start], the next documents are scanned.
Note • The same operation is performed if you press the <Start> button on the control panel.
„
Sample Set
When making multiple sets of copies, you can print a sample set to check the finished
output and then print the remaining copy sets. You can select to continue or cancel the
job after the confirmation.
[Build Job - Separators] Screen
You can insert a sheet of paper as a separator in between each stack of documents.
You can specify the number of separators to insert within the range of 1 to 99 as
necessary.
Note • : You can specify different settings for each stack of documents. If you do not specify
particular settings for each stack of documents, the previously specified settings are applied.
1
Select any item.
2
Select [ ]/[ ] or use the numeric
keypad to enter the number of
separators to insert.