2 Fax
26
Fa
x
2
Fax Procedure
This section describes the basic fax operations. The following shows the fax flow and
reference sections.
Step 1 Loading Documents
There are two methods for loading documents:
Document Feeder
z
Single sheet
z
Multiple sheets
Document Glass
z
Single sheet
z
Bound documents, such as books
Document Feeder
The document feeder automatically detects documents of standard-size widths.
Note
• The standard document sizes that can be detected automatically depend on the [Paper Size
Settings] in the System Administration mode. For information on the paper size settings,
refer to "6 System Settings" > "Common Settings" > "Other Settings" > "Paper Size Settings"
in the Administrator Guide.
The sizes on the left are detected as the sizes shown on the right.
z
8-inch width document
J
B5 width document
z
10-inch width document
J
B4 width document
Document Feeder (ApeosPort series models)
The document feeder supports single and multiple sheet documents with sizes from
140 x 210 mm (A5, A5 ) to 297 x 600 mm (long) (A3, 11 x 17 inches).
The document feeder accepts the following number of sheets.
Document Feeder (DocuCentre series models)
The document feeder supports single and multiple sheet documents with sizes from
139.7 x 210 mm (A5, A5 ), 5.5 x 8.5 inches) to 297 x 600 mm (long) (A3, 11 x 17
inches).
Document Type (Weight)
Number of
Sheets
Lightweight paper (38 - 49 g/m
2
)
250 sheets
Plain paper (50 - 80 g/m
2
)
250 sheets
Heavyweight paper (81 - 128 g/m
2
)
150 sheets
Heavyweight paper (129 - 200 g/m
2
)
100 sheets
