Fuji massage chair WAIKIKI I-562, Руководство по эксплуатации

Страница: 7 / 10

11
10
01 ~ 03
1) Press red power button during massage to stop all massage functions
immediately, the backrest and footrest will return to original position
Automatically. After rated working time, all massage functions will be finished but
backrest and footrest won't return to original position.
2) After rated working time or switch off, the handle controller displayed "Memory
Set On" and glitter, and remind the users whether need to store the massage
mode before turn off, you can choose the memo function buttons A, B, C as your
requirement, store the massage mode. Press the red button again, the machine
turn off, and the massage hands will restore to the original position, or wait for 10
seconds, the machine turn off automatically, and the massage restore to the
Original position.
Method of usage Method of usage
3.The angle of back rest and calf rest
Buttons
Description Display
Auto lie-down mode: with 3 auto lie-down modes, when
press the button, turn into one mode.
Calf rest lifting button: press this button, calf rest lifting slowly, stop
when release it.
Calf rest decline button: press this button, calf rest decline slowly, stop
when release it.
Back rest lifting button: press this button, back rest lifting slowly, stop
when release it.
Back rest decline button: press this button, back rest decline slowly,
stop when release it.
Linkage upward: press this button, the back rest lifting slowly, and the
calf rest decline slowly at the same time, stop when release it.
Linkage downward: press this button, the back rest decline slowly, and
the calf rest lifting slowly at the same time, stop when release it.
4.Turn off power, stop massage
NOTES
If the massage is time up, and without press memory function, backrest and calf
rest cannot restore automatically.
Cut off the power of the whole machine
Figure (figure of the power cut off).
Position for switching the power supply off Method for cutting off the power supply
5.Calf rest extend infinite or turnover freely
Calf rest using extend infinite adjust function, fit for different heights using foot
support turn over freely, massage on foot at any angle.
Ahead driving
T
u
rn
o
v
e
r
Calf rest extend infinite
Calf rest turnover freely
6.Upper arms installation
Zipper the upper arms open which on the rear end, connect the air tubes between
backrest frame and upper arms; insert the guide post on the upper arms into corres-
ponding holes on the backrest frames, avoid to bending.( Figure 1)
Pressing the upper arms and fixing it on the backrest frame with two screws, check
the air tube whether it is bending and the zipper is pressing before it is fixed.(Figure 2)
Pull zipper to the bottom, flapping the surface to make it smoothly(Figure 3).
The installation finished. Note: do not yank, press and twist with force when using it.
(Figure 4)
Figure 1 Figure 2 Figure 3 Figure 4
Zipper