56
INZ-TN2ZPAH-E
b. How to remove block cell (See Fig. 7-2)
)RUVWHRZWRUHPRYHSLSHFHOO
'LVFRQQHFWDQGUHPRYHGHWHFWRURXWSXWFDEOHVIURPGHWHFWRURXWSXWFLUFXLWERDUG1R
$SSO\LQJLGHQWL¿FDWLRQPDUNRQWRSRIUHPRYHGFDEOHFRQQHFWRUZLOOHQVXUHSURSHUSLQDV
-
VLJQPHQWODWHU
8QVFUHZWKHWZRVFUHZV1RWKDWKROGWKHGHWHFWRUWRWKHOLJKWVRXUFHXQLWWRUHPRYHWKH
GHWHFWRUIURPWKHPHDVXULQJXQLW7KHEORFNFHOOFDQEHUHPRYHGWRJHWKHUZLWKWKHGHWHFWRU
7RUHPRYHWKHEORFNFHOOXQVFUHZWKHWZRVFUHZV1RKROGLQJWKHEORFNFHOOWRWKHGHWHF
-
WRU7KHLQIUDUHGWUDQVPLVVLRQZLQGRZ1RLVMXVWVDQGZLFKHGQRW¿[HGEHWZHHQWKH
GHWHFWRUDQGEORFNFHOO.HHSWKHGHWHFWRUIDFLQJXSZKHQUHPRYLQJWKLVZLQGRZ
)RUDVVHPEO\UHYHUVHWKHGLVDVVHPEO\SURFHGXUHV
Note) The O-ring (No. 9) is placed between the window holder and block cell. Take care
about the O-ring position. With 2-component analyzer, install 2-component detector
last. Take care so that no space is left between the 1-component and 2-component
detectors. When inserting the detector output cable connector into the PCB board,
be careful to attach the connector with proper pin assignment (top/bottom).
