Fuji Electric NRF30, Руководство пользователя

Страница: 23 / 31

WTA528774 23/31
No Item Display Remarks
3 Operating time display
Accumulated time (In case of the setting is 9:30 )
Time count up
TIME, Operating Time and LED are blinking.
The time alarm will
be activated when
the operating time
reaches the preset
time value.
Remaining time display Decrease time (In case of the setting is 9:30 )
TIME, Remaining-time and LED are blinking.
The time alarm is
activated, when
the remaining-time
reaches to zero.
4 Low battery display [BATT] will start blinking if the battery level is low.
Blink
(LED is NOT blinking)
Note: During this alarm activation, the beep sound
of dose and dose rate alarm will stop. After
low battery voltage alarm (BATT blinking),
available for about 10 hours without alarm
and backlight.
The low battery
alarm will beep 5
times only.
LED is NOT
blinking.
In this case,
please replace to
a new battery as
soon as possible.
5 Detector function error
display
“E :06” will start blinking if an error occurred with
detection circuit (e.g. an open circuit or short
–circuit with condensing).
DO NOT use the
dosimeter after
this error.
Time count down
Blink
●
Blink
●