Fuji Electric Monitouch V9 Series, Руководство по устранению неисправностей и техническому обслуживанию

Страница: 62 / 145

2
2. Local Mode Screen 2-21
L
oca
l M
o
de
Sc
re
en
IP Address Setting for Additional Wired LAN
Setting on the V9 Unit
This is the same as “IP Address Setting for the V9 Series” (page 2-14) of “LAN Setting”.
Setting Using the V-SFT Editor
1. Select [System Setting]

[Ethernet Communication]

[Local Port Address] on V-SFT.
The [IP Address Setting] window is displayed.
2. Select the [Set IP] checkbox in the [LAN2] tab window, and set each item.
* For details on the setting items, refer to page 2-16.
3. Click [OK].
4. Transfer the screen program to the V9 series unit.
5. Select the [Restore Screen Data Settings] switch in the [LAN2 Setting]

[IP Setting] tab window
in Local mode, and press the [Apply] switch.
Select IP Address from
Network Table
This is valid when the IP address of the V9 series unit has been
registered in the network table. Select a network table number from 0 to
255 to set the IP address.
IP Address
*
Set the IP address for the additional LAN port of the V9 series unit.
Default Gateway
* Set the default gateway.
Subnet Mask
*
Set the subnet mask.
When this box is not checked, the subnet mask is automatically assigned
based on the first octet of the IP address.
Example:
IP address 172.16.200.185: “255.255.0.0” is set.
IP address 192.168.1.185:
“255.255.255.0” is set.
Port No.
*
Set a port number from 1024 to 65535.
(“8001” is not available.)
Send Timeout
Set a timeout period for transmitting macro commands EREAD,
EWRITE, SEND, MES or Ethernet DLL functions.
Retrials
0 to 255
Set the number of retries to be performed when a timeout occurs.
Device Protect
Internal Device
Memory Card Device
Select these checkboxes to write-protect the corresponding device
memory from PCs or other stations.