Fuji Electric FRENIC-HVAC series, Инструкция по эксплуатации

Страница: 5 / 37

Page 5 of 37
Installation
CAUTION
The FRENIC-HVAC Combination VFD should be located:
•
Away from flammable or combustible liquids, gases, and other materials
•
Away from sources of severe dust, metal shavings, or other particulate
material
•
Away from corrosive liquids, spray, or mist
•
Away from sources of heat
•
Where the ambient temperature will remain between -10°C (14°F) and 40°C
(104°F)
•
Where the elevation is 3300ft or lower, above this level requires derating the
current
Wall-mount panels must be mounted to a surface that is capable of supporting the
weight of the panel.
Refer to the Outline/Layout drawing that shipped with the panel for required clearances.
Routing of field wiring should be planned in coordination with choosing a mounting
location.
Disconnect – Motor branch circuit protection to be provided by customer/others per table
on next page.