WWW.FUHR.DE
7
834
autotronic
9.1 Radio receiver
Frequency:
868.3 MHz
Modulation:
FSK (frequency shift keying)
Security:
Rolling-code with master
transmission principle
Aerial:
On board
Power supply:
12 V DC
Current consumption: 15 mA
Operating control:
Red light emitting diode (LED)
Temperature range:
-10°C to +50°C
Dimensions:
43 x 40 x 15 mm
Connection cable:
3-core, approx. 320 mm long
Weight:
approx. 50 g
IP rating:
IP 20
Switching impulse:
Potential-free
9.2 Master radio key
The hand-held transmitters conform to the R&TTE
guideline 2014
/
53
/
EU
Frequency:
868.3 MHz
Modulation:
FSK (frequency shift keying)
Security:
Rolling-code
Channels:
3
Power supply:
1 x 3 V battery, CR 2032
Operating control:
Red light emitting diode (LED)
Temperature range:
-10°C to +50°C
Dimensions:
53 x 36 x 15 mm
Weight:
approx. 20 g
9 Technical data
10 The radio receiver’s LED signals
The following LED signals can only be checked after applying the 12 V DC power supply.
The LED tune in button lights up permanently
Ø
A master key has not been tuned in yet.
Please note
: The first radio transmitter tuned in is
the future master radio transmitter!
The LED tune in button lights up for 2 seconds
Ø
A previously tuned in transmission signal has been
picked up, the lock unlocks motor-driven.
The LED tune in button lights up for 0.5 seconds
Ø
A transmission signal that has not been tuned in yet
has been picked up, the lock does not unlock.
The LED tune in button doesn’t light up at all
Ø
The LED does not light up in the non-actuated
original position, as no transmission signal has been
picked up. Should the LED not light up despite trans-
mitting an opening signal, the radio receiver and/or
the motor lock have not yet been connected to the
12 V DC operating voltage or the cables on the drive
unit’s coupler have been connected incorrectly.
