User ManualFugoo Style-SBluetooth Speaker Model FSNA7page 69/30/2016
Disconnecting fromanother Bluetooth device
To disconnectyour Fugoo Style-S Bluetooth Speaker from a Bluetooth sourcedevice, you
can:
• Click the
(Bluetooth) button on your speaker.
• Move your speaker and the Bluetooth source device apart until they disconnect.
• Turn off your speaker.
• Turn off the Bluetooth source device.
• Turn off Bluetooth on your Bluetooth source device.
• Plug an audio cable into the speaker’s audio input jack.
• Disconnecting temporarily interrupts the Bluetooth wireless link between the speaker
and the currently paired source device, which permits the speaker to re-connect with
another source device to which it has been previously paired. The disconnected
device will still be paired with the speaker, allowing them to automatically reconnect
at another time.
Reconnecting
• To reconnect to a Bluetooth source device to which you have previously paired, just
turn on the speaker and the source device, and place them within 33 feet (10
meters) of each other.
It’s also necessary that no cable be plugged into the audio input jack.
Typically, speaker and the source device will reconnect automatically.
• If voice prompts are enabled, the speaker says "Connected".
Clearing all Bluetooth source device pairings
• To clear all of the Bluetooth pairings with source devices, turn the speaker on, and
then hold the
(Bluetooth) button for ten seconds, until the speaker says "All
Bluetooth pairings cleared. Pairing mode. Please use the Bluetooth settings of your
device to connect.”
Audio playback
Adjusting the volume
• Click
the
+
(Volume up) or
–
(Volume down) buttons to raise or lower the volume.
Playback
•
Play / pause
– Click
O
(Action Button) to toggle playingand pausing your audio.
•
Next track
: click
O and
+
to skip to the next track of the recording you're listening to.
•
Previous track
:
O and
–
toskip to the previous track of the recording you're listening
to.
All manuals and user guides at all-guides.com
all-guides.com
