User Manual Fugoo Style Bluetooth Speaker Model F6SP page 4 1/10/2020
two green blinks
one green blink
Battery is low.
• While the speaker’s battery is being charged, the LED will slowly pulse on/off green.
• When the speaker’s battery has reached full charge, the LED will glow solid green.
Charging your speaker
• Connect supplied Micro-USB charging cable to the speaker.
• While the battery is being charged, the LED will slowly pulse on/off green.
• When the battery has reached full charge, the LED will glow solid green.
Powering on your speaker
•
Click the (Power) button momentarily to power the speaker on.
• When the speaker runs from battery power, it will power itself off after a period of inactivity.
• Hold the (Power) button for one second to turn the speaker off.
Connecting your speaker to smartphones and other devices
You can connect to your Fugoo speaker to a source device either through its audio
input jack or through a Bluetooth wireless link. Only one of these inputs can be active
at a time.
Connecting through an audio cable to the audio input jack
• Connect one end the supplied 3.5 mm audio cable to your speaker’s audio input
jack, then connect the other end to the headphones jack of your audio source
device.
• Plugging the supplied audio cable into the speaker's audio input jack turns off the
Bluetooth wireless link, to save power and maximize battery life.
Pairing and connecting with another Bluetooth device
1. Make sure that a 3.5 mm audio cable is
not
connected to the speaker's audio input.
2. Place your Fugoo Bluetooth Speaker and your other Bluetooth device within
33 feet (10 meters) of each other.
3. Turn the speaker and the source device on.
4. Hold the (Bluetooth) button for three seconds. The LED blinks blue and red
repeatedly. If voice prompts are enabled, the speaker says, “Pairing mode.
Use the Bluetooth settings of your device to connect.” The speaker will
remain in pairing mode for three minutes, or until it pairs with your device.
5. On you’re Bluetooth source device, turn on Bluetooth, which will allow it to
discover the speaker. (See the Bluetooth settings information for your device.)
6. Select 'Fugoo' on your Bluetooth source device.
7. Wait briefly for the speaker to discover your Bluetooth source device. If voice
prompts are enabled, the speaker will say, "Pairing successful” and
“Connected”.
