7. In case of fire;
6,5, 3, 1-Series Fuel Pump User's Guide
4. Installation
Be carefull about the fuel pumps and equipment to be provided substantiality and completed.
Please contact your service provider, in the case any technical deficiency or distortion.
4.1 Mechanical Installation
The pumps' installation places should be determined in accordance by the Savel technical
service teams' recommendations..
4.2 Electrical Installation
The pump's connection to the electricity network, must be be performed by an authorized
person. Computing unit of the pump should be fed with a regulator or uninterruptible power
supply (UPS).
5. Security measures should be taken
It should be noted the high risk fuel transport. Everything in this guide was written to protect
you and your assets' safety. To strictly fulfill them will give you a smooth working
environment.
1. Do not smoke and do not let smoke at environment of the gas station pumps and
tanks.
2. Turn off the electrical connector from the emergency stop button or the control
panel, in case of any leakage.
3. Fire extinguishers need to be immediately ready for use at a location near here.
4. Only authorized personnel to allow the response to problems with electricity.
5. The technical interventions for the pumps has to be made the Savel technical service
provider. Otherwise it will not take any responsibility.
6. Hang the following warning signs as to where you can see easily.
Do not Smoke!
Stop the engine during the filling!
Turn off mobile phones during the filling!
Hang the Nozzle its place after the filling!
Position your station to the emergency stop situation.
Leave the danger zone
call the fire department and report the situation
Follow instructions; Fire and emergency
6. First Run
6.1 Control
8
