Fuel HT 200, Руководство пользователя

Страница: 29 / 36

29
COMPUTER OPERATION
FUNCTIONAL BUTTON
MODE – Press to switch between different functions.
– Hold down for 6 seconds to reset all data.
FUNCTIONS AND OPERATIONS
1. SCAN : Press MODE button until “▼” appears at SCAN position, monitor will rotate through
the following functions: speed, distance, time, calorie, ODO and pulse - each display will be
shown for 4 seconds.
2.
TIME : Shows your elapsed workout time (minutes:seconds) up to 99:59.
3. SPEED : Displays current speed. The maximum value is 999.9 km/h
4. DISTANCE : Shows the distance from exercise start. The maximum value is 99.99 km.
5. CALORIE : Shows the calories burned (approximate value only, not suitable for therapeutic
use). The maximum value is 999.9 kcal.
6.
ODOMETER : Monitor will display the total accumulated exercise distance of the device. The
maximum value is 999.9 km.
7.
PULSE RATE: Press MODE button until “▼” appears at PULSE position.
Before measuring your pulse rate, place the palms of your hands on both contact sensors.
The monitor will show your current heartbeat-rate in beats per minute (BPM) after approx. 6~7
seconds.
Remark: The pulse measurement value cannot be used as base of a medical treatment.