Fuel EC 100, Руководство пользователя

Страница: 37 / 48

37
TAG = Target H.R.C. - - Workout by your target heart rate value.
In “TAG” mode, use „UP/DOWN“-buttons for direct input of the target pulse value (default: 100). You may now
preset a target value for “TIME” by using “UP”, “DOWN” and “MODE/ENTER”. Press “START/ STOP” to start
workout. To pause your workout, press the „START/STOP “-button again. Press “RESET” to return to main menu.
Fig. 15 Fig. 16
Recovery
With this special function, you can check your hearts recovery rate after a training session. This is a very important
indication for the physical condition of your body. Try to improve your recovery rate with regular training sessions.
The aim is, to calm down to a normal pulse frequency (frequency, when you are not in motion) as quickly as possible.
To check your recovery rate, you need to keep your hands onto the hand pulse-sensors (or keep wearing a chest
belt) after your exercise. Now press the button “RECOVERY”. The computer will start to countdown 60 seconds
(figure 17). During this period the computer will constantly measure your heart rate through the hand sensors. After
this minute, your recovery rate will be displayed on the display. The range is F1.0 to F6.0 (figure 18), whereby F1.0
is very good and F6.0 is insufficient. Improve your value by intense and regular training!
After the recovery function is finished, press “RECOVERY” again to return to normal operation mode.
Fig. 17 Fig. 18