2 - 70
71130/11E/0318
Safety Instructions
•
Before operating with or at the device/product, read through the operating instructions.
This manual contains instructions which should be followed on mounting, start-up, and operation.
A non-observance might cause:
- failure of important functions
- endangering of persons by electrical or mechanical effect
- damages to objects
•
Mounting, electrical connection and wiring of the device/product must be carried out only by a qualified
technician who is familiar with and observes the engineering regulations, provisions and standards applicable in
each case.
•
Repairs and maintenance may only be carried out by trained staff or the manufacturer.
Only components and spare parts supplied and/or recommended by the manufacturer should be used for
repairs.
•
Electrical devices/products must be mounted and wired in zero potential state only.
•
The manufacturer guarantees proper functioning of the device/products provided that no modifications have
been made to the mechanics, electronics or software, and that the following points are observed:
•
All information, warnings and instructions for use included in these operating instructions must be taken into
account and observed as this is essential to ensure trouble-free operation and a safe condition of the measuring
system / device / product.
•
The device / product is designed for a specific application as described in these operating instructions.
•
The device / product should be operated with the accessories and consumables supplied and/or recommended
by the manufacturer.
•
Recommendation: As it is possible that each measuring system / device / product under certain conditions, and
in rare cases, may also output erroneous measuring values, it is recommended to use redundant systems with
plausibility checks with
security-relevant applications
.
Environment
•
Products governed by the provisions of "
ElektroG
"
(
German Electrical and Electronic
Equipment Act) will be taken back and will be recycled or environmentally compatible
disposed. We are prepared to take back all products concerned free of charge if returned to us
by our customers carriage-paid.
•
Make sure you retain packaging for storage or transport of products. Should packaging
however no longer be required, arrange for recycling as the packaging materials are designed
to be recycled.
Documentation
•
© Copyright
FuehlerSysteme eNET International GmbH
, Nuremberg / Germany
•
Although this operating instruction has been drawn up with due care,
FuehlerSysteme eNET International
GmbH
can accept no liability whatsoever for any technical and typographical errors or omissions in this
document that might remain.
•
We can accept no liability whatsoever for any losses arising from the information contained in this document.
•
Subject to modification in terms of content.
•
The device / product should not be passed on without the/these operating instructions.
