© by WilTec Wildanger Technik GmbH
Item 62841
Page 8
http://www.fudajo.com
06 2022-1
3.
Fix the other pair of fasteners on the top of the tube
(4).
Then loosen the screws to be able to
attach the tubes
(5)
and
(6).
4.
Two persons are required to lift the assembly of the tubes
(5)
and
(6)
on the upper end of the
tubes
(4),
to fix them to the two fasteners, and two re-tighten the screws. Voilà, the frame is
assembled.
5.
Take the roof cover out of its packing. Two persons must seize each edge of the cover, put it
onto the roof frame, and make sure that it rests symmetrically.
6.
Fix the roof cover to the frame and edge of the wire mesh using the black ropes included. To
finish mounting, tighten them well.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.
