Fubag TR 180, Руководство оператора

Страница: 6 / 17

Case protection class.
IP is the code of International Protection. Figure 2 means preventing user's finger from
the dangerous parts; preventing the solid material with the diameter no less than 12 5
mm into the box. Figure 1 means preventing water dropping vertically which is
harmless. Letter S means water proof test is conducting while the movable parts is
standstill. ,
nsulation grade I
IP21S
H
4. Installation
Before any maintenance or cable connection ensure that the welding machine is out of power
supply.
Choose the proper place for operation. Ensure in sufficient ventilation and in hindrance absence for
fresh air input and output. Ensure that no dust providing vapors, moisture, etc
comes not in
ventilation.
The welder needs larger input current when operating. If power net cannot provide sufficient power
source, it will negatively influence the welding quality as well the power of other electrical
appliances. If you have any problem relevant to this, you should consult with electrical specialist.
Please always make sure before connecting that the voltage must be in conformity with the voltage
given on the welder's indication plate.
The plug of input power cable must be adapted to socket. Before making any electrical
connection check for the main voltage ratings to correspond to available voltage and main
frequency;
The socket used must be equipped with fuses or an automatic switch of adequate capacity
corresponding to the information given on the data plate of the machine.
Connection between elder and ower ource w p s
1
2
One end of welder' output cable is connected with welder as shown on the
panel, the other end is connected with work piece
and electrode holder
.
If the end of welder' output cable is quick connector (option), it must be
touched by clockwise, if loose, the quick connector and welding cable will
be ruined.
Connection between elder and lectrode older & ork iece w e h w p
(1)
(2)
O m perator's anual
www.fubag.ru
- - 5
www.fubag.ru