![Fubag TI1000 Скачать руководство пользователя страница 18](http://html1.mh-extra.com/html/fubag/ti1000/ti1000_operators-manual_2341398018.webp)
www.fubag.ru
O
m
perator's
anual
The DC receptacle may be used for charging 12 volt automotive-type batteries only.
In DC operation, turn the Smart throttle switch to the OFF position.
1. Connect the charging cables to the DC receptacle of the generator and then to the
battery terminals.
- To prevent the possibility of creating a spark near the battery, connect
charging cable first to the generator, then to the battery. Disconnect cable
first at the battery.
- Before connecting charging cables to a battery that is installed in a vehicle,
disconnect the vehicles grounded battery cable. Reconnect the vehicle's
grounded battery cable after the charging cables are removed. This
procedure will prevent the possibility of a short circuit and sparks if you make
accidental contact between a battery terminal and the vehicle's frame or
body.
- Do not attempt to start an automobile engine with the generator still
connected to the battery. The generator may be damaged.
- Connect the positive battery terminal to the positive charging cord. Do not
reverse the charging cables, or serious damage to the generator and/or
battery may occur.
WARNING!
Charging Cable
- 17 -
www.fubag.ru
Содержание TI1000
Страница 1: ...www fubag ru ...