Fubag SIROCCO Keramik 20M, Руководство оператора

Страница: 4 / 11

www.fubag.ru
O m perator's anual
- 3 -
4. Connection and Operating mode
During the operation the user can
increase the air out-let angle.
Firstly tighten the adjustment knob
at both ends of steel-pipe rack then
gently press the tail top of the
product with hand, the heater will
be tilted. Adjust the hot air direction
to the user needed angle, now the
heater blows hot air up, if the user
needs the direction of air to be
horizontal blown out, gently press
the control box top at the front part
of product.
When using the heater for the first time, you may notice a slight emission of smoke. This is quite
normal and it stops after a short time. The heating element was coated with protection oil by
production. The smoke is caused by the left oil when heated.
:
– : ;
– : + ( , );
– : + (2,0 ).
Note!
1 0
Plug in the AC . Turn on the device and install a power selector to the
desired position
– First position: disabled;
econd position fan
Third position fan heaters rated power kW
Fourth position fan heating elements the total power kW
220V (380V for 50T model)
S
For SIROCCO Keramik 20M
For Keramik 33M
For Keramik
SIROCCO
SIROCCO 50T
– First position: disabled;
–
econd position: fan;
– Third position: fan + heaters 1/ rated power ( ,5kW);
– Fourth position: fan + heating elements the total power (3,0kW).
– First position: disabled;
–
econd position: fan;
– Third position: fan + heaters 1/ rated power ( , kW);
– Fourth position: fan + heating elements the total power ( ,0kW).
S
2 1
S
2 3 3
5