Fubag HANDY AIR OL 195, Руководство оператора

Страница: 7 / 12

www.fubag.ru
O m perator's anual
- 6 -
3. Start-up and use
-
.
.
- .
-
.
-
.
-
.
- .
Screw the threaded fitting or fast connect (according to the versions) into the threaded hole on the
side of the compressor and connect the hose to the compressed air outlet (fig. 1) Some versions
are equipped with a hose so that the operation can be performed directly by the user
Connect a mechanical tool to the free end of the hose
Insert the plug of the power cable in a suitable socket checking that the illuminated switch on the
compressor is in the "O" (OFF) position (fig.2) At this point, the compressor is ready for use
Operating on the switch, the compressor starts to produce compressed air from the end of the hose
in order to power the tool The excess air produced by the compressor in relation to that required for
use is vented by a valve located inside the compressor On some models, the speed of the air can
be adjusted using the knob of the regulator (fig.3) When necessary, switch off the compressor
always using the key of the on-off switch
Always wait at least 10 seconds from the moment in which the compressor has been switched off
before restarting this
When you have finished your work, always pull out the plug
4. Inflation gun
For inflating tires, rubber dinghies, air beds, footballs and other objects.
- Connect the inflation gun to the compressor.
- When inflating car tires or certain bicycle tires, it is not necessary to insert any of the adapters (fig. 5).
Press tab A and connect the hose to the tire pushing the fitting on the valve (fig. 6) and then
releasing the tab.
- Regulate working pressure to the value indicated for this accessory.
- Inflate the tire pressing lever B until the inflation pressure required, indicated on gauge C, is reached
(figures 4-7). In the case of over-inflation, press button D to reduce inflation pressure (figures 4-7).
- When inflating footballs, rubber dinghies, certain bicycle tires and children's inflatable swimming-
pools, you may have to use a suitable adapter (fig. 5)
- Adapter E is used for footballs
- Adapter F is used for rubber dinghies, air beds and children's swimming-pools
- Adapter G is used for certain bicycles
Select the suitable adapter and insert it in the inflation hose pressing tab A (fig. 8).
- Push the adapter in the inflation hose a shown in figure 8 and release tab A.
- To fasten the adapter, turn it slightly in a clockwise direction.
- Inflate the object required as described in point above.
- After use, always store the inflation gun in a dry, clean environment. Do not use solvents, flammable
or toxic liquids to clean the inflation gun.
www.fubag.ru