Fubag BRISE 10, Руководство оператора

Страница: 5 / 11

www.fubag.ru
O m perator's anual
- - 4
5 Stop
6 aintenance
.
. M
-
-
-
-
-
°
- '
-
-
To switch off the heater, always close the gas cylinder valve firstly.
Turn off the ON-OFF Switch, the ventilator will run still for one minute to cool down the heater, then
pull out the power cord.
If the heater will not be used again in short period, disconnect the gas hose from the heater firstly,
then disconnect hose and regulator from the valve on the gas cylinder.
: Be sure that the valve on the gas cylinder has been shut off firmly before disconnection!
When changing cylinder, be sure the atmosphere is flame-free! Should there be any gas leakage
during operation found, close the valve on gas cylinder immediately, open all windows and gates
and inform fire extinguisher, if necessary.
Before cleaning the appliance, disconnect it from the socket and let it cool down.
The enclosure is easily to get dirty, wipe it often with soft sponge. For very dirty parts, wipe with a
sponge dipped in < 50 C water and mild detergent, then dry the heater enclosure with clean cloth.
Be careful not to let the water enter the appliance inner.
Don t splash water onto the heater never use solvent like gasoline, isoamyl acetate, toluene etc to
clean the heater, in order to protect the enclosure.
Clean the coupler, dry and pack it in a plastic bag.
When you store the heater, let it cool down first, keep it dry. Then cover it with a plastic bag, put in
the packing box and store it in a dry, ventilated place.
WARNING
7 roubleshooting . T
PROBLEM POSSIBLE CAUSE REMEDI
No electricity Check power supply
Fan doesn’t work
Blade blocked by shell Adjust motor grid
Igniting cable worn out Change cable
High voltage pack defect Change high voltage pack No Ignition
Distance between electrode and burner Adjust distance to about
Gas cylinder is empty Replace new gas cylinder
Gas valve on cylinder closed Open the valve
No gas
Gas valve of heater not open Press the button of gas valve