18
Assembly
Step 1 Remove the packing material and keep it away from children.
Step 2 Before continuing, check that the plug is not plugged into the
socket and the control button is on ‘0’ (off).
Step 3 Mount the plastic base to the motor housing (including the stand).
Pull the electric cable with the plug through the opening in the
plastic base and affix to the base using the three screws included in
the delivery.
Step 4 Pull the electric cable through the holder and the opening in the
plastic base.
Step 5 Tighten the plastic screw cap (that affixes the fan blade) of the fan
axle.
Attention: you must turn it clockwise to dismount the screw cap
(to loosen it).
Step 6 Tighten the threaded turnbuckle (that affixes the protective grill) of
the motor housing; turn it counter-clockwise to dismount the guard
nut (to loosen it).
Step 7 Place the rear protective grill against the front side of the motor
housing with the carrier bracket on the protective grill
facing upwards. Make sure that the positioning pins of the motor
housing are placed correctly in the slots of the protective grill.
Step 8 Now tighten the guard nut (that affixes the protective grill) firmly
clockwise onto the screw thread of the motor housing.
Step 9 Remove the PVC sleeve of the motor axle.
Step 10 Place the fan blade onto the motor axle. Important! Make sure that
the pins of the motor align properly with the appropriate recesses in
the fan blade.
Step 11 Tighten the plastic spinner (for affixing the fan blade) firmly counter-
clockwise onto the motor axle to secure the fan blade.
Step 12 Check to see that the fan blade rotates properly.
Step 13 Turn the screw of the locking ring almost entirely loose and loosely
place the plastic locking ring with the rear groove around the rear
protective grill.
Step 14 Now mount the rear protective grill in the front groove of the plas
tic locking ring and tighten the screw firmly. Both protective grills
are now solidly connected to each other.
