6
Version 1.0
© FTEmaximal
1 2 3 4 5 6
1.
POWER:
Switch the receiver on, or enter the standby mode. To switch off the
receiver you have to use the switch of the back side of this engine.
2.
POWER LED:
Indicates that the mains voltage (90-230VAC) is available.
3.
SIGNAL LED:
Indicates a sufficient signal level.
4.
DISPLAY:
4 Digits to display the program numbers.
5.
IR-SENSOR:
Reception sensor for the IR remote control signals.
6.
BUTTONS:
These buttons allow to control the main functions of the receiver, and
provide the same functionality as the remote control ones.
The IRD 420T/SM receiver do not have any card or module behind
the front lid, so please do not attempt to open it. It could damage
the lid.
Receiver frontal
Connections and controls
3.1
