FTE Maximal Nebula 8S, Руководство пользователя

Страница: 31 / 40

User’s manual · Nebula
Reserved for technical modifications and/or errors
-
11
-
Nebula Version en_2.1 FTE maximal
Temperature
This screen is informative and shows the internal temperature of the amplifier, in degrees
Celsius.
Press to access the next screen.
Supply
This screen shows information about the level of the supply voltage from the external power supply. The
messages that may appear on the screen are:
-
Supp OK
: The supply voltage is normal.
-
Supp Hi
: The supply voltage is high. The power supply is not adequate model or
may be a power supply failure.
-
Supp Lo
: The supply voltage is low. It may be due to excessive consumption of the
amplifier and various elements connected to it, such as LNBs and preamplifiers or
possible power supply failure.
Press to access the next screen.
Import
This screen allows import a complete configuration of the equipment. (*)
If usually set the same channel settings is possible store the configuration in the USB
memory, (The Nebula amplifier allow up to 1000 configurations). With this option, The
Nebula amplifier read the configuration file from the USB disk and does a fast programming
in Nebula amplifiers.
When entering, a screen appears to select the stored file number. Select the file with keys and press
OK
to
confirm.
Once selected, the file loads the configuration into the amplifier. Please wait.
When finished, a message appears indicating that the configuration load is complete.
Press to access the next screen.
(*) it is necesary to connect a USB memory to the USB port of amplifier to access this menu. The USB memory
must be formatted in a FAT or FAT32 file system.
Export
This screen allows you to save the current configuration of the headend to the USB device.
(*)
When entering, a screen appears to select the file number to store. Select the file with
keys and press
OK
to confirm.
Once selected, save the configuration of the amplifier to the USB. Please wait.
When finished, a message appears indicating that the configuration load is complete.
Press to access the next screen.
(*) It is necessary to have a USB memory connected to the amplifier to access this menu. The USB memory must
be formatted in a FAT or FAT32 file system.
CONFIG^
56ºC
CONFIG^
Supp OK
CONFIG^
Import
SEL.FILE
N8S_C005 CONFIG^
Wait…
CONFIG^
Complete
CONFIG^
Export
SEL.FILE
N8S_C001 CONFIG^
Wait…
CONFIG^
Complete