All rights reserved
12
© FTEmaximal
Correct position
Multivision
IR Remote Reception
For the right function of remote control repeater, the choice of LED cable
position is very important. Cable length is 1,9 meters.
The LED cable transmits the signals generated in remote rooms to control the
Multivision as well as the rest of devices that have this function.
Most entertaintment devices A/V have an infrared sensor on its front panel, so
they all can be controlled from the same place.
The complement of the LED cable is the IR receiver located in the remote
rooms. It gets the signals from remote controls, modulates them in 11 MHz and
transmits them through the coax cable from this room to the Multivision.
To install the IR receiver following things must be considered.
1st Cable length between receiver and sensor IR 4 (this is the one that really
receives infrared signal) is 1,9 meters.
2nd The Sensor (IR 4) must be located in a visible place.
3rd Receiver must be plugged in a power supply (included in the equipment).
DVD
Multivision
VCR
SAT
LED
cable
IR-
sending
diode
Start with the last diode of the LED
cable and the farest unit.
Place the sending diode on the side
of the sensor window.
You can fix the LED after removing the
adhesive.
0145
Display
IR-sensor
LED
cable
IR-
Sending
diode